Installation

Installation Location

The BMS100 series are designed to be installed into a water and/or dust proof compartment within a vehicle or installation, close to battery packs.

The modules are designed to an IP30 ingress protection rating, reducing risk of damage to the internal electronics from handling and installation tooling.

Risk of damage from temporary conductivity caused by pollution is reduced on the Helot modules by using conformal coating on the Printed Circuit Board Assembly (PCBA).

Mounting

All Helot (BMS100) series module variants have the same physical dimensions and mounting points.

Fastening Hardware

The module is fastened to a mounting bracket or plate with four (4) M3 socket head screws.

Mounting Outline

BMS100 Module - Mounting Outline.